Shockley Combo of XH-W1209 50~100 digital temperature controller thermostat with 3inch fan + 12v 2amp adapter + alligator clip + DC Female Jack + Thermometer TPM-10


Category: Tag:


Price: [price_with_discount]
(as of [price_update_date] – Details)

Shockley XH-W1209 Combo with Fan , Adapter , Alligator Clips , Thermometer
Product Name – Shockley XH-W1209 Combo with Fan , Adapter , Alligator Clips , Female DC Jack wire and Thermometer
In Package : 1 x XH-W1209 THERMOSTAT
1 x 12V Fan
1 x 12V 2Amp Adapter
2 x Alligator Clips Black & Red
1 x Female DC jack wire
1 x Thermometer

XH-W1209 thermostat module has a temperature sensor, keys, LED display, relay and requires DC 12V power supply. It is a good quality thermostat controller. Thermostats are devices that sense the temperature of a system so that the temperature is maintained at the desired set point or near to it. NTC temperature sensor allows the module to intelligently control varied electrical devices based on the temperature. NTC thermistor has a negative temperature coefficient, which means the resistance decreases with increasing temperature. XH-W1209 has an inbuilt embedded micro-controller, thus not much programming knowledge is required. The module consists of three switches to configure the various parameters including ON and OFF trigger temperatures. The temperature is displayed in degree centigrade and with the help of 7-segment display and the relay, the state is displayed with the help of the LED present on the XH-W1209 module.
Caution : If you see sold and Fulfilled by Shockley then only you will get the original product.

Date First Available‏:‎5 January 2021
Item part number‏:‎XH-W1209 combo Thermometer TPM-10
Country of Origin‏:‎India

Current temperature will be displayed on the module in degree Celsius by default. When switched to a different mode, inactivity for approximately 5 seconds would lead to restoring the value of the module to the default temperature display.
Output: 1 Channel relay output, capacity = 10A
You Can DIY incubator machine with the help of XH-w1209 controller board and 3inch fan this is a diy kit for diying a incubator